Sneak Peek...
Printable View
Sneak Peek...
Just order some 272/264 cams today...More snapshots
http://kethura12.fileave.com/1215101514.jpg
http://kethura12.fileave.com/1215101514a.jpg
http://kethura12.fileave.com/1215101514b.jpg
that's some fortified yummies! Keep us posted.
Ill definitely keep my eye on this thread!
Bored yesterday, so decide to install a 2G turbo air box
Here is the stock...just rubbish.
http://www.zwixy.com/images/ppOMcw1294670448/c3.JPG
Here is the 2G air box with a K&N air filter. I need to make a mount or bracket for the air box to keep it stationary.
http://www.zwixy.com/images/923665AB1294670448/o2.JPG
Need to "reorganize" the engine bay when I install the Cyclone IM
http://www.zwixy.com/images/Zkjex129.../New_Image.JPG
http://www.zwixy.com/images/D2HKb7dc1294670448/i1.JPG
Whats the difference between the 7g box and the turbo 2g?
Im thinking about doing a custom cold air box with a cone filter inside.
Given it's OE, it has a cripser/sharper throttle response. The total volume is bigger than the stocker and is less restricted too. Planning to add a ram air tube to it in the spring. Oh yeah, cams should be here around Wednesday.
I got good news and bad news:
Good news-cams arrive today
The Bad-they sent me the wrong exhaust cam.
Post pics tonight.
http://kethura12.fileave.com/0112111614a(1).JPG
A sneek peek of the last piece of the puzzle or better yet my last future major purchase...I wonder who make these...
http://i154.photobucket.com/albums/s.../WP_000011.jpg
http://i154.photobucket.com/albums/s.../WP_000015.jpg
http://i154.photobucket.com/albums/s.../WP_000019.jpg
wow that looks sick. I was going to say wtf no collector for a quick second before i scrolled down more. And i have no clue on the maker.
Thats sick!!
thats awesome man I want some
thanks awsome.
looks great man.
it will fit the 4G64 and it most likely clear the P/S pump and radiator fans but probably will reroute the upper radiator hose. but they are pretty expensive, like $650 w/o shipping costs. hopefully i can get one used for a reasonable price. Here it is in the Accord.
http://img.photobucket.com/albums/v4...bayoverall.jpg
http://www.zwixy.com/images/F2stNl91...0126111519.jpg
http://www.zwixy.com/images/WCnB1297...0126111522.jpg
Make a blockoff plate for the Idle Air Control
http://kethura12.fileave.com/0202111729a.jpg
Out goes the 1G TB/IM
http://www.zwixy.com/images/Seii1297...0203110911.jpg
http://www.zwixy.com/images/EaAX6cn1...0203110912.jpg
Side by side comparison
http://www.zwixy.com/images/YUewX129...0203111538.jpg
Got it mounted and later on, I remove the cruise control components
http://www.zwixy.com/images/7TdUkN12...0205111558.jpg
Temporary bracket for the throttle cable
http://www.zwixy.com/images/0uGc1297...0206111449.jpg
Rewire TPS harness and extend 1G CAS harness
http://www.zwixy.com/images/gdVo1297...0206111633.jpg
Yes it cluster but it started up but died. Bypass screw was tighten down so open it up and restart. Idles okay. No surge, no stalling. Have not drove it yet but RPM soars when WOT. Tuck some wires to give it a cleaner look, will post pics of that tomorrow along with a possible vid.
Just need to permanently mount the airbox, reposition the throttle cable by 1/4", either extend the wiring for the coilpacks or wire in some GM twin tower coilpacks, and reroute the PCV system with a catch can setup.
http://kethura12.fileave.com/100_0388A.JPG
http://kethura12.fileave.com/100_0389A.JPG
http://kethura12.fileave.com/100_0390A.JPG
http://kethura12.fileave.com/100_0391A.JPG
In the process of installing an oil catch can...Love the throttle response...Hate that I mess up my paint on the manifold.
very nice
now do a pull
Nice! this has been soooo long in the making. I can't wait to see some numbers.
Coolant temp sensor?
are you still running the stock exhaust?
When I had a stock GS I remember hollowing out the cat and it making damn noticable difference in power, throttle response, sound(even through the stock muffler) and top end. It was like a whole different car.
How about one of these?
I'll see tonight if my camerawoman is up to the job.
I have coolant temp sensor, it's under the t-stat housing. yes running stock exhaust for now...working on a replacement as well as a HFC. I need to finish collecting items for my cam swap.
Is that the intake making all that noise? you need to run it into a CAI. And i can see the throttle response is pretty damn good.
What are you going to use for a A/F control? I might jump on the tac trix cable because i want to up the redline.
vrsexhaust.com get a 2g GST mandrel tubing kit, and a 30" 2.5" inline magnaflow muffler and a vibrant performance muffler for the back. the sound is like the car should have sounded from the factory. You will get compliments, and you will love being able to hear your music and talk on the highway without a droning exhaust.
Best exhaust combo hands down for our cars(any car really).
As far as the coolant sensor i was wondering why the sensor on top of the tstat housing wasn't hooked up. thats the one i used to for my ECU like stock. Then one of the lower ones for the gauge cluster.
sweet. Do i hear a idle video soon?
Hopefully within two months
Where did you find the gasket for the cyclone intake???
I am confused i see a trubo manifold form the looks of it, and then a header? whats the plans
damnit y cant i see your pics anywhere!!!
Looks like I'm installing cams this weekend...water pump shaft broke!!! LOL
Bitchin'!!!
Awwwwww i want vids, and dyno's and to drive it.
No vids right now but I have pics.
http://kethura12.fileave.com/0314111049(1).JPG
http://kethura12.fileave.com/0314111050(1).JPG
Well, remove the stock cat & install a test pipe...I need a muffler as the stock one is becoming past it's prime. Going to do some logs tomorrow and probably the whole weekend as I will be gathering data for the Eprom ECU.
why ont you share how you do this^